IDX 7350mAh JVC Battery

IDX 7350mAh JVC Battery

_x000D_

The SSL-JVC75 was specifically developed for the JVC GY-HM600, GY-HM650, GY-HMQ10, GY-HMQ30, and GY-LS300 camcorders. Equipped with an additional output, X-Tap, to provide power to another accessory at once. X-Tap is an IDX proprietary output port and is different from D-Tap (7V vs 12V), but can also be a charge port using our LC-XT1 portable charger. C-XTAP2 is also available to create your own cable for your setup.

_x000D_

Features:

_x000D_

_x000D_
• Compatible with JVC GY-HMQ10U and GY-HM600 series professional camcorders ï‚·
_x000D_
• Highest Capacity Battery for longer running times SSL-JVC75 battery run-times*:_x000D_
  _x000D_
  • GY-HMQ10U Typical run-time: 3 hours @ 18W
  _x000D_
  • GY-HM600 Typical run-time: 4.5 hours @ 12W
  _x000D_
  _x000D_
_x000D_
• Battery circuit protection ensures the SSL-JVC75 is fully protected against common causes of battery misuse, guarding against over charge, over discharge and over load incidences
_x000D_
• DC out via X-Tap connector
_x000D_
• Marker Empty/Full Physical sliding switch to indicate battery status
_x000D_
• The SSL-JVC75 Li-ion battery should only be used with recommended IDX chargers LC-2J below or charged in situ on the JVC camcorders
_x000D_

_x000D_

 

_x000D_ _x000D_ _x000D_ _x000D_ _x000D_ _x000D_ _x000D_ _x000D_ _x000D_ _x000D_ _x000D_ _x000D_ _x000D_ _x000D_ _x000D_ _x000D_ _x000D_ _x000D_ _x000D_ _x000D_ _x000D_ _x000D_ _x000D_ _x000D_ _x000D_ _x000D_ _x000D_ _x000D_

_x000D_ Capacity: _x000D_	_x000D_ 7350mAh, 55Wh _x000D_
_x000D_ Max Output Voltage: _x000D_	_x000D_ 8.4V DC _x000D_
_x000D_ Nominal Voltage: _x000D_	_x000D_ 7.4V DC _x000D_
_x000D_ Max Discharge Current: _x000D_	_x000D_ Main Connector: 21W/3.5A X-Tap: 20W/3.3ATotal Combined: 41W _x000D_
_x000D_ Battery Protection: _x000D_	_x000D_ Over charge, Over discharge, Over current _x000D_
_x000D_ Weight _x000D_	_x000D_ 0.79 lbs _x000D_

_x000D_

 

_x000D_